Power Cord for driver

@dbrn32 I got my driver today but no wall plug😥what do I need to buy to operate my
Hlg 320h c1750a any help is appreciated

You can buy a “cheap” power strip or extension cord and cut the end off you don’t need. Then wire it up.

2 Likes

Thank you for your speedy response I’m so excited to build this light

2 Likes

What are you building?

1 Like

Qb light 3 hlg boards 288 r spec 320 w

1 Like

My driver and heatsink came today we have to go get a couple parts to complete build

Those are going to kick some butt!

1 Like

I can’t find 22 g solid core wire but I found thermostat wire. Will that work?

1 Like

That’s what I’m using

1 Like

Thank you

How close to my seedlings with domes on can I put the light? Should I start at half power?

Any 16/3 cord or bigger should do. If you’re using thermostat wire make sure it’s the 150v variety. Personally I would do 18awg 300v solid.

3 Likes

Just make sure its heavyish. That’s what I did with mine btw.

I had to order a spool when I wired mine nowhere here had it in small coils.

2 Likes

I get mine from big lots. They’re usually like $2-$4 depending on how long you want them.

2 Likes

I bought some cheap small powerbar at lowes and shopped the cord off.

1 Like

Ok I have it turned all the way down and 26 in from the plants

3 Likes