I have eight plants 2 died so far and 2 aren’t growing. I have four healthy plants left, should I just start the grow over?
COPY/PASTE the below list into your forum post.
Answer these simple questions the best you can.
If you do not know, or do not use something; Just say so; Or post
NA (non applicable)
-What strain, Seed bank, or bag seed (photo or auto)
-Age of plant/what week of flower
-Method: Soil w/salt, Organic soil, Hydroponics, Aquaponics, KNF
-Vessels: Pots, Grow beds, Buckets, fabric pots
-PH and TDS of Water, Solution, runoff (if Applicable)
-PPM/TDS or EC of nutrient solution if applicable
-Method used to measure PH and TDS
-Indoor or Outdoor if indoor, size of grow space
-Light system LED, MH/HPS/CMH/Fluorescents, or other
-Actual wattage draw of lights
-Current Light Schedule
-Temps; Day, Night
-Humidity; Day, Night
-Ventilation system; Yes, No, Size
-AC, Humidifier, De-humidifier,
-Co2; Yes, No
If growing Hydro some additional questions:
-DWC? RDWC? Autopots? Ebb and Flow? Other?
-Distance of liquid below net pot (DWC)
-Temperature of reservoir
-TDS of nutrient solution
-Amount of air to solution
Always try to upload a clear picture in white light of any issues you may have to allow the community to assist you.
Add anything else you feel would help us give you a most informed answer should be included. Feel free to elaborate, but short and to the point questions and facts will help us help you in a more efficient manner 
3 Likes
Hydro dwc ect takes alot. Do u have a water chiller or whats the temps in the res hold at. I see alot of lights and no tubing between each one as they dont look like air cooled or whatever. Might have alot to do with heat. As myfriend said fill out the support ticket and that will help every1 alot more. No need to scrap 4 to 6 good plants
I’m a bit late but can you explain the system you built with a simple drawing ?
Pails,pipes,pumps,res location etc. Explain all please
Show pics of bubbles in water. Each pail may be different. Also note water height to bottom of net pot.
Also always check for roots clogging output flow from pail. I usually wrap roots on airstone airline to keep from getting to output.
Also lol I keep thinking of possible problems. Check foam filters in any submersible pump weekly or as needed to maintain proper water flow.
Looks like a lack of air flow to your quicker growing plants. I’m with @Mark0427 on the chiller idea, but check your air hoses, they need to be at least nearly the same length from air pump manifold? You may be getting more output in one or two buckets compared to your other ones. Air, like water, requires same length hoses to deliver equal outcome.
1 Like