@beardless …diy. take a 5gal bucket add gamma seal lid to seal the top. 2 small air line check valves from aquarium store. A (length) of air hose with holes drilled in it and plug the end. Insert hose through hole in bottom of bucket from inside and attach check valve outside flow direction going in…attach small piece of tubing through a hole in the top of the bucket with chexk valve outside and flow going out of the bucket. Will run the inlet line back to the same air pump used for my air stones in the plant buckets.Plug the pump into the same timer used for my lights and set times on the timer. The pump will kick on and as soon as pressure is built in the bucket it will release it out of the top check valve. When the pump cuts off both valves will seal back off and the boveda packs will keep the rh set in the bucket. Fill the bucket about 3/4 way full…give the bucket a slow roll on its side once a day to help with bud compression.
9 Likes