Bottle says*; Use 10-20ml per 10 liters. This equates to 1-2 ml per liter.
In gallons I recommend 4-7ml per gallon, depending on your stage of growth.
A Qt. is slight less than a liter. So you can still break it down to 1-2ml per Qt. Or; Since a gallon is less than 4 liters. I come yp with 4-7ml per gallon.
If you have a 5 gallon bucket; chances are that you are not using 5 gallons, but only approx. 4 gallons. This would mean that you can add 16-28ml per 5 gallon bucket solution change. Which can be rounded off to 1-2 TBS. per reservoir change
1Tbs./15ml - 2Tbs./30ml per 4 gallons/5g bucket of PH’d water. Hope this helps
- I believe there is a typo on the label. Now, I am legally blind, but I believe there is an error in the parentheses. No way you use 6.5 ounces per 2.5 gallons.
This thread is for Marijuana Booster mixing Q and A exclusively. This thread is not for questions about when to use the Booster or how to manage temps in the desert. Etc, etc. Thank you all for limiting your questions to How to mix and apply Marijuana Booster. All other questions should be placed in the appropriate grow support section. Peace