Jbum’s first ride on the grow side

Oh my I love the rest of the gang :heart: I wonder what happened to the turkeys :thinking: I’m sorry to hear you lost them!

5 Likes

I don’t know where you live but I like it :+1:

I have super hard water here 535ppm. I have to make ro water, ppms are 12 when done. I then mix my water 50/50 tap and ro. leave out for 24 hours to remove the chlorine. When done. My ph starting point is close to 8 as well. add a lot of ph down. I always check what my water ppm is before I use it. So after I add nutes. I can tell more or less what I am at. This is a page from my ASC I did to give you an idea what notes I keep. The ph out is my run off as is the TDS. The first TDS is what I am feeding total, water and nutes. The very right shows how many cups of water or feed I gave and the out is the run off.
The numbers on the very left tell me what I fed and how much. It goes with with my feed chart above. I will re add so they are together to look at. Looking at the feed chart, A number 1 shows 1/4 strength, number 2 is 1/2 and so on. I like that no matter what grow I have done. The info I see is always the same. I just add more numbers when I had some thing else to try like bud candy or what ever.
I t sounds like your run off ph numbers are headed the right way :grin:

3 Likes

Well since yesterday’s watering with just the Cal/Mag they seemed to be responding ok. So much I think they are do for yet another trim!

Ha you can see them trying to complete for the light. I am going to go in and rectify all that right now lol.

Uploading: C0063C2E-A2BD-414B-BC33-B5A9A4471501.jpeg… Uploading: 96446782-0663-412D-BFFA-156C510392C7.jpeg… Uploading: 6D14A5BD-2F67-4924-9FA6-FC651C4D079A.jpeg…

1 Like

I don’t think your picture loaded. Good to hear they are doing well.

2 Likes

Hmmm sorry here we go.

7 Likes

We all know a PITA it can be watering with a SCROG so I’m Gonna try out the new water system tomorrow. Need to grab a manifold for it as well. But it feeds one gallon a minute at the moment. The lil pumps speed can be adjusted up or down. I just grabbed some T’s and made a circle with the 1/2 inch rubber hose. Plugged one end with som plastic and drilled some holes. Should work pretty good if it works as well as the weed outside I tested it on lol. But now I can make my water in one bucket and just pour enough per plant or simply mark the pump bucket still a work in progress lol.

@Cyle1 @Killadruid @Missiles @imSICKkid @Not2SureYet

48

9 Likes

@kw_Bat @elheffe702 @TXCanna :point_up:

That is awesome!! I have stayed away from a scrog for one of them reasons. You are a genius :grin:

3 Likes

Hell ya that makes it easyer

1 Like

I have to take em all out do it one at a time

Haha thanks don’t know about genius but maybe smarter than your average bear!?!? Haha JK. Actually I think @Killadruid has something similar

1 Like

With this you can leave em place. Even installing the rings. Probably have to reposition it eah feed sto it doesn’t wear on one spot but that’s not a biggy .

2 Likes

Tent makes that easyer

If I did a scrog I’d have to only do 2 plant on 2 separate nets and on rollers like @Not2SureYet has

1 Like

Looks like it’ll work good :+1:

2 Likes

Yeah mines on rollers to. The next two I have going will be separate screens as well.

2 Likes

I’m try 4 in my space then if they fit next I’ll jam 5 in there

2 Likes

I’m excited to see what you get off them clones how much longer on veg you thinking

3 Likes

I’m only into week 4 of veg. I’m going to do one more treatment for the spider mites then cut the clones. I haven’t seen anymore but @Myfriendis410 suggest a follow up treatment so that’s what I am gonna do lol. His advice has done me well thus far.

5 Likes

Sweet stuff man!

1 Like