Oh good, I’ve never harvest before…sounds exciting, so the leaves start dying before I harvest…Okay makes sense I’ll start reading today on it. Ty so much!
Hey @raustin…I think I’m getting close. I don’t have the eyes to know. Will you take a peek and guide me through the end of this grow? I have this mornings pics. I took the fan leaves off a few days ago after reading that is a start of the harvest. I’m stuck now on what to do next
I’m happy to help you through harvest.
First, the pistils are still white which means you’re not as close as you think. I think you’ve still got a few weeks left. Once those pistils start to turn a dark brown, or red color, you can start to get ready for harvest, and that’s when you’ll do your flush.
Second, after the pistils darken, it’s time to check the trichomes. You can do this with a mini microscope, so if you don’t have one, now is the time to prepare. This is the one I and many of us use. It’s cheap, only $7, but does a great job.
Here’s some reading material and guides to help you with your journeys
Luckily we’ve had such gracious fellow growers and moderators put together this easy follow along. I haven’t reached my first harvest yet so it’s always easiest to provide a guide to sift through.
The first, and perhaps most important, aspect of harvesting cannabis is knowing exactly when to start chopping down the ladies. A precision harvest is essential for potent cultivation. Growers must be very careful not to cut down plants that are not yet at the pinnacle of resin production, but they must also be wary of cutting plants too late—at a time when THC production has curtailed and resin glands begin to degrade.
There are various methods by which even the most amateur grower can tell when buds are truly ripe for the picking. The simplest and quickest way to know is by examining the pistils, or long hairs, that cover the plant’s buds. At the onset of flowering, these pistils are white and stringy. But as the flowering period comes to an end, they begin to turn color, first from white to orange and then again to a dark red or brown. These color changes signify the maturation of the buds; however, the color and time frame may vary significantly across different varieties of cannabis.
Therefore, a better, yet slightly more complicated, method for determining ripeness is through trichome examination. Trichomes are the actual resin glands that contain THC and other psychoactive cannabinoids, and they are very delicate and easily ruptured. These trichomes are visible on the outside of buds and small leaves and look like little white sugar crystals to the naked eye. However, with the power of a magnifying glass or simple microscope, you can see that trichomes are comprised of a stalk and resin head and are clear or white in color.
As with pistils, trichomes also begin to change color as the buds mature. But in this scenario, a grower wants to harvest buds before they get too dark in color. Even a subtle amber hue in these glands could mean that cannabinoids have begun breaking down and decomposing, which means less potent pot. Using a magnifier between 50x-100x, advanced growers look for a creamy or milky white color in trichomes that tells them it’s time to harvest.
As with most tricks of the trade, there is always a catch. And in this case it can be taken quite literally as well, because when checking your buds for ripeness you’ll want to “catch” any and all clues that can signal maturation—a few weeks before harvest time. Having a “harvest heads-up” can be extremely beneficial for growers, not only to prep equipment and rooms for drying and curing, but also to prep the plants for taste and smooth smoking.
If a grower can consistently examine trichomes and keep accurate time records from the start of the flowering photoperiod (12/12 light cycle), then it should be no problem for the grower to begin flushing out the grow medium in preparation for the harvest.
The last two weeks of flowering should be spent getting rid of any built-up nutrients in the growing medium, a process called leaching, or flushing. By removing all access to nutrients, the plant begins to consume its stored food reserves. These reserves are nasty compounds that we don’t want in our smoke, such as sugars, starches and various other elements. Harvesting plants that still have these undesirable elements present will only result in a harsh smoke and terrible burnability.
Flushing should begin about 14 days before harvest by stopping all nutrients and using only pure water to feed the plants. By providing no nutrients, you force the plant to rely only on what is left in the growing medium to feed on. The actual act of flushing is achieved by over-irrigating the medium until the nutrients inside are dissolved and washed out the bottom of the container. The best way to do this is with a two-step flush technique. (The process is an easy one.)
First, flood the grow medium with a heavy dose of water and wait a few minutes to allow all of the salts (nutrient buildup) to break down. Then add more water to chase out the first dose. By waiting a few minutes after adding the first dose of water, you’re allowing enough time for the water to dissolve the salts. As salts decompose, they can be effectively flushed out by the second dose. Traditional leaching usually employs only the first flush of water, which isn’t always adequate for complete dissolution.
A few days after flushing, you should notice signs of nitrogen deficiency. The leaves will go from dark to light green, eventually turning completely yellow. Another sign is a reddening of the leaf stems, starting at the center of the leaf where the blades come together.
Test your flush by snapping off a leaf and tasting the juice that flows from the stem. If the taste is bitter, there’s still plenty of food in the plant’s system. When the juices are clean and taste like pure water, the plant is clean enough for harvest. The bitterness is from nutrients and other chemicals that you definitely do not want in your smoke.
Dry Air = More Resin
One final flush should occur a day or two before harvesting, with the final 24 hours of the garden’s life being spent in relative dryness. This last deluge should be done with fresh water and can be a single or a two-step flush, depending on how much fertilizer was applied previous to the final two weeks of flowering. This will be the final watering your plants ever get. In doing this, you help ensure that the plants will begin to slowly dehydrate as you approach harvest, which in turn will aid the plants in their final hours of resin production.
Some gardeners even like to allow their medium to go bone-dry before harvesting. The idea is that resin production seems to skyrocket if the medium is allowed to dry before harvesting, but this isn’t due to dry medium – it’s due to dry air.
When the relative humidity in the garden is low, your resin production will increase. This is a natural response cannabis has to dry air, an attempt to protect itself from hot, dry conditions. Marijuana resin actually has one of the highest UV-resistance ratings in the plant kingdom. The resin reflects light, preventing the buds from getting sunburn. (This is also why it’s so easy for helicopters to spot marijuana from the sky; it glows when seen through UV-sensitive equipment.)
Lowering the humidity in the room on that last night before harvest morning will ensure increased resin production, without having to let the medium go bone-dry first. Additionally, some growers like to subject their gardens to prolonged dark periods of up to 24 hours just before cutting, claiming they notice spikes in resin production. This is all right as the low humidity will cut down on light uptake anyway, plus it helps to make sure liquid foods within the plants drain down to the root zone.
Harvest & Manicure
When the big day arrives it is best to start early, before the light period begins in the growroom. If the grow lamps turn on, it’s okay to cut them completely and work by standard room lighting. Begin by cutting the entire plant away from the root ball. If the plants are too large to harvest with one cut at the bottom, start by cutting the larger, heavier branches first. Remember to leave one or two larger stems connected to the branches you are cutting off. These stems will form nice “Vs” on the branches for easy hang drying.
Most indoor growers begin taking off the large fan leaves about a week before actual harvest. This is a good idea, especially once these leaves begin paling from green to yellow in color. Continue your harvest by taking off all leaves not associated with the buds and then move on to trimming off the smaller sugar leaves. Look for leaves with little resin coverage first and then move into the interior of the nuggets. It’s easier to remove leaves within the buds once they have dried out a bit, but that adds extra time and a second round of manicuring. By turning buds over and getting to the underside of smaller sugar leaves, it becomes easier to snip away at the stem and remove the entire leaf. Many growers like to only trim off leaf edges that come out of buds, leaving an aesthetic shape to the bud with the heavily resinated portion of the sugar leaves still intact within the buds.
Once the plants are cut, trimmed and manicured to perfection, it is best to hang branches upside down on strings strung across open spaces to get maximum air flow over your buds. Keeping buds on the branches does slow the drying, as the branches do retain some water however, this is the easiest way to completely surround buds with dry air without using drying chambers or machines.
Drying for Taste and Burnability
Now that you’ve harvested and are ready to dry and cure, you will want to preserve as much of the vibrant color and taste of your herb as possible. Buds should hang dry for five to seven days at the ideal temperature of about 70ºF with 50 percent humidity. You want to get most of the water out of the buds in those first days and then slow the process down for another week or so during the curing process.
Remember that a plant is not dead upon cutting—it is still very much alive. A plant is effectively dead when the water pressure inside is too low to continue vascular movement. In other words, when the waterworks stop, the plant is dead. The goal here is to dry the plant as evenly as possible and at a nice slow pace. When buds are rapidly dried, the plant tissue can trap in unwanted starches and nitrates which cause buds to burn unevenly and with an awful taste.
At four to five days into the dry, the tips of some buds might be dry enough to pluck off and sample. After the buds have gone through their full cycle of drying, we want to slow the whole thing down and draw the rest of the moisture out very gradually. This is the curing process.
What’s the Cure?
If your herb is harvested correctly, there is very little need for long cures. Long cures are needed to make harsh herb smoke smoother. If you start out with smooth, clean herb, there’s less need for long cures. Most buds should be cured and ready to smoke in less than two weeks after the drying period. Expert growers who harvest properly can complete curing in five or six days, but a good average can easily range from 10 to 14 days.
Inexperienced growers often tend to get impatient and only cure for a few days, but this can be a costly mistake when it comes to potency. Allowing the buds to cure evenly, which means drying at a slower rate, removes moisture within the buds so that all the THC can be converted in its psychoactive form.
The curing process evens out the moisture levels in the herb. You want the same amount of moisture in the center of the buds as you do on the outside of the buds until they are almost totally devoid of fluids. Completely drying the herb too fast can trap moisture in the middle and not allow for a proper cure.
For the curing process, you want to put the half-dried buds into air-tight containers. Inside the container, the buds will become evenly moist, inside and out, as they begin to “sweat.” You can check to see if your buds are sweating and releasing moisture by gently squeezing them between your fingers to see if they feel damper than they did a few hours before sealing them up. Glass jars with rubber seals and lockdown lids are the best option for curing, but for large amounts of harvested buds, you’ll need something much bigger. Tight-sealing rubber or plastic bins are the best option for large quantities of buds but many growers feel these containers impart a plastic-type taste onto the buds. This can be offset by adding a small slice of lemon or orange peel to the bins toward the end of your cure.
Once the buds are again evenly moist, open the containers to let the moist air exchange with fresh air. Air exchanges are essential to the curing process. Not only do they prevent condensation from forming in your curing bins, but the fresh air is drier than the air you just allowed to escape from the container. The moisture still trapped in the herb will again slowly escape and moisten the new, fresh air. Open the container several times a day to exchange the moistened air with fresh air to slowly draw out the moisture in the buds. Eventually (again, one to two weeks) the moisture level in the herb will be at the right level to stash away and, of course, smoke!
What Time of Day to Harvest?
Timing the harvest is Paramount to the final quality. Harvest your precious buds in the dark, just before the lights normally come on. If possible, do not allow the plants to see direct light as long as their roots are attached. Direct light on a plant will draw up stored starches and sugars from the root system.
During the nighttime hours, our ladies are busy storing food down in their root system that they made during the daylight hours. During “lights out,” starches and sugars produced by photosynthesis during the day drain downward to the roots. Knowing this, it is easy to figure out that you want to cut your plants away from the roots before the lights come on, when food moves back upward into the buds.
Outdoor herb is often harvested during the daytime hours and the result is a harsh, difficult burn and an extra long cure. The starches and sugars present in daytime-harvested herb act like fire retardants—not the effect we’re looking for. In addition to tasting and burning bad, these fire retardants also change the chemical make up of the smoke you’re ingesting. This means that the THC, cannabinol, cannabidoil and other active cannabinoids can’t burn at the perfect temperature to get you properly high because they haven’t properly converted to their psychoactive forms.
Facts on Drying & Curing
• During the drying of marijuana buds, THC is converted from an acidic, non-psychoactive chemical into a neutrally based, psychoactive form that gets you high. This is why fresh marijuana is generally weaker than properly dried and cured buds.
• Marijuana will lose approximately 75 percent of its weight during drying due to water evaporating from plant matter.
•Buds dried too fast will be frail and may start to crumble. Keep humidity between 45 and 55 percent in your drying room to prevent this and to help keep aroma and flavor locked in.
•Buds are done drying and ready for curing when stems snap when bent rather than just folding over
Strain; Sour Diesel , Bag seed,
Soil in pots, Hydroponic, or Coco? Soil
System type? grow tent out take fans an circulation
PH of runoff or solution in reservoir? N/a
What is strength of nutrient mix? EC, or TDS n/a
Indoor or Outdoor, indoor
Light system, size? 400 watt cob
Temps; Day, Night n/a
Humidity; Day, Night n/a
Ventilation system; Yes, No, Size Yes
AC, Humidifier, De-humidifier, de-Humidifier
Co2; Yes, No yes
Hey @raustin, well I’ve been doing some reading, I’m trying to come up with harvesting ideas. I’m going to bring her in and dry her in a much cooler environment. I got the 60x lens and I cut back on lights a few days ago until I got my magnifier. I figured it had to be close. Roxy is about all dry in the soil. I got some trichome photos tonight, finally. Any input on how I can dry her in my closet. Not worried about smell mostly pets? I had a dream of a box in a dark closet with air holes and a bar or rod of some kind across the inside of the box for hanging, of course with 70°Temps low humity. What do you think you guys, is she ready?
@Aolelon @Countryboyjvd1971 971 @Growit @chip_butterfield @FNG101v2 @shwiftyrick90 @garrigan65 any and all helpful ideas appreciated ty
I say go for it my friend. You know most growers don’t know this but after you cut her down and hang her she still will change into more amber. The longer you cure her the better she will get. What I do Jamie is to hang and cut all the big leaf’s off. After a week to 10 days I cut all the buds off and into paper bags. Opening twice a day. for another week or so then into mason jars. talk about some kick ass smoke. It takes about a month an a half and I’ll tell you what…you can’t go wrong. My friends hate it but then there all smiles and can’t get enough…
Sounds good to me, where do you hang yours for a week to 10 days first? Paper bag/sack…no plastic, I’m ready to get it going just don’t want her to dry out too fast. Wooo scary, I’m afraid I’m going to fail at this, I hope not. Okay I’m going to do it tomorrow. Your awesome! Oh so after about a week put in mason jars then keep seals up about a month or so Ty my friend!
Your to funny…nothing to worry about you’ll be just fine. Do as I said and you’ll do just fine. I have 3 tents so I just hung them in the big tent . IGo to this link ….The fruity pack and gold leaf begain
Scroll down near the bottom and you’ll see where I did my harvest…IT’S POST #516
Hey @garrigan65 what was your Temps like in your tent, and humity? My tent is in my garage that’s where I’ve grown this baby. Ty for the info, I think that’s what I’m going to do, just that…probably bring my tent in though, sounds like the Temps need to be lower than 80 and 90° well wish me luck
Solid advice from one of the best @Jamie1234
Good luck with the harvest and enjoy the fruits of your labor
Yes, just do what @garrigan65 said and you’ll be fine. Nothing to worry about, this is the easy part.
I tagged you in on a great drying/curing thread it should help alot
Scroll through and you’ll see all kinds of different ways to dry/cure
You will not fail you are doing great!!
At the moment just sitting in the dark in my garage. Plenty of air, just dry and low humid temps. I’ve now got room to bring my tent inside. Just recouping. I’m bring her to 75° I hope it’s a good move to start drying ms. Roxy. Hope all is happy growing for you bro!
Oh my next grow will be in better Temps and humidity
Got my girl in finally, ok I’m about to cut her life line, well in a few hours lol! Shooweeee…temp is currently 77° Humity 58. I’m so happy now bring on the next grow this tent isn’t going back to the garage lol!
I want to see her hanging…lol
Ok…it will be a bit. I will post it
Okay I did it!