Ilgm I have a problem

The leaves have pale green spots

1 Like

had that too… it grew out of it…


I came up with the ILGM “Support Ticket” in order to help new members a way to provide the necessary information to the community mentors, and expert staff.

Experienced community members and expert staff will be better informed and more capable of providing a more informed answer.

COPY/PASTE the below list into your forum post.

Answer these simple questions the best you can.
If you do not know, or do not use something; Just say so; Or post
NA (non applicable)

  • What strain, Seed bank, or bag seed
  • Method: Soil w/salt, Organic soil, Hydroponics, Aquaponics, KNF
  • Vessels: Pots, Grow beds, Buckets, Troths
  • PH of Water, Solution, runoff (if Applicable)
  • PPM/TDS or EC of nutrient solution if applicable
  • Indoor or Outdoor
  • Light system
  • Temps; Day, Night
  • Humidity; Day, Night
  • Ventilation system; Yes, No, Size
  • AC, Humidifier, De-humidifier,
  • Co2; Yes, No

Always try to upload a clear picture of any issues you may have to allow the community to assist you.

Add anything else you feel would help us give you a most informed answer should be included. Feel free to elaborate, but short and to the point questions and facts will help us help you in a more efficient manner :slight_smile:


  • What strain, Seed bank, or bag seed -ilgm white widow auto

  • Method: Hydroponics RDWC


  • PH of Water, 6.5

  • PPM/TDS or EC of nutrient solution if applicable - ppm 1264

  • Indoor

  • Light system yehsense 600w LED

  • Temps; Day, Night

  • Humidity; Day, Night. It’s been low I’m working on it

  • Ventilation system; Yes, No, Size 10" fan

  • AC, Humidifier, De-humidifier,

  • Co2; not yet
    Gh flora series

1 Like

PH should be below 6.0; likely seeing the results of that and possible nutrient excess.

No higher than 900 ppm in veg

Spend the money instead on a better light.


Should replace half the water or use pH down?

Your choice but should be around 5.5.

1 Like

Isn’t it 5.8?

1 Like

5.3 to 5.8 or so for hydro. I usually run most stuff between 5.8 and 6.0.

1 Like

Finally got a pH meter that works. pH is fine now. still struggling with the temps but working on it.