Help dying plant GDp

I got a question for those who know. My plant was the best plant that I had, 6" in fingers, 1 " across , indica, from figer tip to finger tip was 12" it was massive. 27 days old. It was a GDP I took cuttings from the lower branches because I was going to do a manifold and maximize my grow, 3 days later my cuttings have rooted, all of them, but my monster plant is dying! I flushed it and very, very gently pulled it up-yes I got the tap root, and I transplanted it to new soil. I was using miracle pro Organics optics soil and it has always done me outstanding, what would cause this plant to up and die when the rest of the plants are exactly that same. I dont get it. I checked ph with a digital PhD meter and 6.0no over watering or overfeeding. What am I doing wrong.

1 Like

this was the plant 2 days before it died. I did fliluc sh it and put it into new soil but what I dont understand the 9 cuttings that I took all have roots at day3

these are the other plants under the same circumstances the white spots is cakcuim

Some pictures under regular light will help, hard to tell whats going on under the blurples. How big/old was your mother plant?

I can tag you some peeps who know a bit more than me about cloning. @kaptain3d @Covertgrower @Hellraiser


Definitely need better pics and, Answer these simple questions the best you can.
If you do not know, or do not use something; Just say so; Or post
NA (non applicable)

What strain, Seed bank, or bag seed

Method: Soil w/salt, Organic soil, Hydroponics, Aquaponics, KNF

Vessels: Pots, Grow beds, Buckets, Troths

PH of Water, Solution, runoff (if Applicable)

PPM/TDS or EC of nutrient solution if applicable

Indoor or Outdoor

Light system

Temps; Day, Night

Humidity; Day, Night

Ventilation system; Yes, No, Size

AC, Humidifier, De-humidifier,

Co2; Yes, No

Always try to upload a clear picture of any issues you may have to allow the community to assist you.

Add anything else you feel would help us give you a most informed answer should be included. Feel free to elaborate, but short and to the point questions and facts will help us help you in a more efficient manner :slight_smile:ou can…


I know what I’m doing but this has ne stumped

1 Like

Sorry about the LEDs but I took the one out before it died

Strain =GDP
Miracle gro oro organics potting soil
7 gal felt pots
Ppm unknown
2-1000 watt king LEDs pulse I have a 1000 watt HPS & MH switchable and dimmable that I use for flowering along wit the leds
No ac temp states at 70 and drops to around 50 at night
Co2. I tried the vinegar and soda and but gave that up due to costly ph is 6.7 sorry

I know the led is misleading but this plant was oerfect-perfect green color very healthy, the healthiest plant that I had honestly. That what I dont get it up and dying after taking cuutings

The nodes were less than an inch apart and the manifold nodes were about 1 1/2 inch apart. It was the healthy plant I have ever seen

How close are your lights?

did you do one single thing or use anything on the mother that you didnt do to the clones?

No I did exactly what I have always done.
The first set of true leaves I cut one off, the second set of true leaves I cut one off and I follow a spiral around until I make my 4th cut(I got this from high times over 35 years ago, then I let the the 5th set grow out and I top the 6th set. This allows for all of the lower tops to catch up. At which time I start my manifold and I use the lower tops as clones. I’ve done this for decades with no problems
But when I did this plant it was so healthy that I knew it would be ok. But I was wrong. I died

1 Like

This is the plant 5 days after taking g cuttings

I just dont get it -i didnt over feed it ir over water it-it you could have seen it before you would be puzzled tp

These are my other GDP, purple haze and purple Kush. Very healthy. The white spots are again calcium

Ok I got pics without the leds.

The 3rd plant was just “lst” a little so it looks rough but the plant that died was 10 times more healthy than these.i did file a support ticket also .my lights are about 24"inc about plant’s

I’m thinking about putting them under my 2000 hos/or mh. My legs look like this

Does that look like its enough?I have 3 of them