I’m kinda new to this whole growing and Hydroponic its about 4 weeks left till Harvest and my buds still seem very small
been keeping an eye on room temp 65 at night and 74 daytime humidity has been about 70 % Been adding Kool bloom and the rest of GH flora nutrients all on the GH feeding table also been keeping an exter watch on the PH level abot 5.8 and 6.0
thoughts might be helpful thanks
aStrain; Type, AMNESIA HAZE (FEM)
, Hydroponic, expanded clay
System type? Hydrofarm DWC Emily’s Garden
PH between 6 and 6.5 perfer 6 solution in reservoir?
What is strength of nutrient mix? 1540 PPM TDS
Indoor
Light system, size? mix of LED and CFL total of 1200 W
Temps; Day,73 Night 65
Humidity; Day 50%, Night same
Ventilation system; Yes, Size
AC,
Co2; Yes,
thoughts might be helpful thanks
Hey brother, can you fill out a support ticket and post some pictures?
COPY/PASTE: This “Support Ticket” into your forum post.
Answer these simple questions the best you can.
If you do not know, or do not use something; Just say so = NA
Strain; Type, Bag seed, or NA
Soil in pots, Hydroponic, or Coco?
System type?
PH of runoff or solution in reservoir?
What is strength of nutrient mix? EC, or TDS
Indoor or Outdoor
Light system, size?
Temps; Day, Night
Humidity; Day, Night
Ventilation system; Yes, No, Size
AC, Humidifier, De-humidifier,
Co2; Yes, No
Add anything else you feel would help us give you a most informed answer. Feel free to elaborate, but short, to the point questions and facts will help us help you
1 Like
well let me start with number of weeks most bud thickening starts around 4-5 weeks into flower and continues until about 7 weeks depending on strain so they have around 3 weeks of fattening yet I wouldn’t be overly worried.
I do have to ask what you are using for lights since light intensity factors greatly
3 Likes
I’m seeing lot of brown to red hairs and very sticky when touched
I’ve lightly brushed my arm and it got tacky
these are not bad things I will say your ppm is pretty high compared to what I run they may like a little lower 1000-1100 you may actually be burning your ladies which is why they seem to be ripening already I would lower ppm and see if you trigger some fresh growth
1 Like
I was thinking it may have something to do with it but not about to lower it using RO water 12 ppm PH 7.0 from filter i adjust it to 5.9 to 6.0
tried using less nutrients or just RO water PH 5.9 to 6.0
any thoughts how to lower the ppm ?
checked my math I’m in the last 3 weeks till harvest I’ll let ya know
how it came out thanks
first two harvested not bad about 28 g. each thanks for all the help
1 Like