Amazon: Boveda Moisture Control Packets dry/cure/store

A great product for aid in curing or storage:

http://www.amazon.com/Boveda-Medium-Gram-Humidipak-62%25/dp/B0087ZNDZY?tag=greenrel-20

http://www.bovedainc.com/solutions/herbal/

~MacG

2 Likes

i bought these 2 months ago lol.
been waiting for harvest to use them.

but,…2 weeks ago. i bought a bag of mangokush from a friend, and it sucked. super dry.
i put in jar with one of those boveda packs,…and about 2-3 days,…was fluffy and fresh again.:thumbsup:

1 Like

*also
one of these little gauge are nice to keep an eye on whats going on inside jar.
cigar shops sell them for those fancy guys and their expensive cigars.
or
http://www.amazon.com/gp/product/B0007W1EA6?tag=greenrel-20

2 Likes

another brand, these you should be able to find at your local
hydro shop

Mondi Hydrometer

http://www.amazon.com/Mondi-MONDIE100-Mini-Greenhouse-Thermo-Hygrometer/dp/B008AL0IJO?tag=greenrel-20

2 Likes

I see a lot of people use the inexpensive reptile aquarium hygrometers, like these:
http://www.amazon.com/Exo-Terra-PT2466-Hygrometer/dp/B00026053Y?tag=greenrel-20

And I have personally used these Chinese ones that are probably most often used in restaurant food storage, but could also be used for reptiles or our purposes:
http://www.amazon.com/Accurate-Portable-Power-Free-Humidity-Hygrometer/dp/B00PI5N9E6?tag=greenrel-20
These might need to be “calibrated” or adjusted by comparing them to a trusted digital hygrometer.

I had to calibrate it for the Chinese cheapoes and I wouldn’t be surprised if the inexpensive reptile one, that are probably made in China also, might also need a bit of an adjustment.

They are easily “calibrated” by carefully accessing the back. There is usually a hole in the middle that gives you access to to a metal frame that has a pair of holes in it and this would normally be for use with the appropriate tool. And if you have one, by all means use it. And if not, I’m sure you can find a pick or something appropriate that can then turn the “adjustment”. This basically turns the box or frame – that the hygrometer coil is housed in – be careful not to touch or damage the coil spring the “dial indicator needle” is attached to – when turning this “box” to adjust the needle to then be pointing at the correct reading on the dial.

You can even get a combo that reads temperature as well and these might be better as far as coming properly calibrated:
http://www.amazon.com/Springfield-Color-Track-Humidity-Thermometer/dp/B00004TBK4?tag=greenrel-20

~MacG

3 Likes